Tuesday, May 8, 2012

Making Tris buffers by mixing

One of my least favorite lab activities is measuring pH. It dates back titrating buffers using burettes in chemistry lab-- drip dropping one droplet at a time, becoming impatient, and then overshooting. Barnacles!

I try to avoid making Tris buffers for the same reason-- it requires careful drip dropping of HCl. If you overshoot a little, you can bring the pH back using NaOH but then you have added NaCl to your buffer. I found out the hard way making TAE buffer this way-- the NaCl conducts electricity too well.

I need to make Tris pH 7.7 for protein purification and was wondering if there was a way to mix Tris base and Tris HCl to come close to the desired pH. It turns out you can using the Henderson Hasselbalch equation.

pH = pK + log([A-]/[HA])

pK for Tris is 8.1 at 25 deg C

[A-] = 0.285 and [HA] = 0.715 for a 1M solution when pH = 7.7

Using FW for Tris base and HCl that translates to 112.7g of Tris HCl and 34.5g Tris base.

Here is a python script I wrote to solve for the values. Save it as pH.py then make it executable using chmod u+x pH.py. To use it, type pH.py 7.7. Here is a sample output:

$ pH.py 7.7
For pH 7.7 Tris buffer at 25 deg
112.72 g of Tris-HCl for 1L of 1M soln
34.49 g of Tris-base for 1L of 1M soln

Here is the python script.

#!/usr/bin/python

import sys

ph = float(sys.argv[1])
pk = 8.1 ## at 25 deg
            ##N.B. per Sigma catalog, pH drops 0.03 to 0.05 per ten fold dilution
            ## also increases ~0.03 per deg C

mwb = 121.136   # FW of tris base
mwa = 157.59    # FW of tris HCl

# use henderson hasselbalch equation to solve for a and b
# pH = pKa +log10(b/a)

a = 1./(1+10**(ph-pk)) #solve for a and b
b=1.-a                  # for a+b =1, i.e. 1M soln
                        # math is your friend

print "For pH %2.1f Tris buffer at 25 deg" % (ph)

print "%.2f g of Tris-HCl for 1L of 1M soln" % (a*mwa)
print "%.2f g of Tris-base for 1L of 1M soln" % (b*mwb)

OK, this is high school chemistry, but that was a long time ago. Hope you find this useful.

Monday, April 9, 2012

ApProg430

I would like to win one of the elusive free PCB coupons from Dangerous Prototypes. Finish one, get another! How can you beat that deal? Haven't won yet, but it is only a matter of time.

I have to admit, I was one of the people who requested the opportunity to buy PCBs from the PCB drawer. When I saw Ian's breakdown of first year sales of the Bus Pirate, I felt twinges of guilt because I had not yet purchased. I plunked down my $10 and received two DIY Bus Pirates PCBs. I sent in a Mouser order for the parts (plus extra SMD resistors because they are easy to lose).

All told, the PCBs, components, plus shipping/handling came out to about $50 for the two Bus Pirates. Considering Seeed Studio will sell you one for $27, assembled, programmed, and shipped, this was starting to look like a losing proposition. Did I mention the twinges of guilt driving the purchase?

I soldered up the boards in an evening. This was my first time assembling SMD parts but after watching the HOWTO videos on Dangerous Prototypes, it wasn't so bad. Patience, flux, and desoldering braid.


When I plugged in a USB cable, the PWR LED came on and the computer recognized the FT232 chips. So far so good. Now I needed to program the PIC24 chips but I don't have a PIC programmer. I didn't want buy a PicKit because that would really make for a losing proposition. I saw that Jozef had devised a way to program the devices using a AVR microcontroller. He was kind enough to share source, precompiled binaries, and firmware. Great! But I don't have a AVR programmer. Talk about bootstrapping problems!

I do have a MSP430 Launchpad and I figured I could have the MSP430 emulate the AVR. I modified the firmware code to run on a MSP430G2553. I picked this part because it has a built in UART. You can probably modify the code to run on MSP430s with software UART but I am not going there.

Here is a picture of the programmer hooked up. PGC is on P2.0, PGD on P2.1 (through a 1K resistor), and MCLR on P2.2. The Launchpad runs at 3.6V but this is within the electrical specs for the PIC24 so I figured why not. Fortunately, it works just fine.


I programmed the v4.4 bootloader using ApProg using the Launchpad running the modified firmware. The firmware came next using the ds30 loader GUI. This is much faster than trying to program the combined bootloader/firmware using ApProg. The ApProg binary is available here.

And it works! I have two functional Bus Pirates. No more twinges of guilt. So the final cost for the two Bus Pirates (PCBs, parts, Launchpad) came out to almost exactly what I could have ordered from Seeed Studio. But mine have DIY silkscreened on the boards!

Here is the source code for the MSP430. It has been condensed into a single file. You can create a new project in code composer studio v5, copy and paste into main.c and compile. Some day, perhaps I will take the time to learn how to host files on github. Posted on github.